
| Item | 08-14767 |
|---|---|
| Model | T8/WSAPB/TNU/TF/WF |
| Series | Turbo-Flo |
| Wetted material | Ductile iron |
| Diaphragm material | PTFE with Neoprene back-up |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / TURBO-FLO SERIES
08-14767 · 2-inch Ductile iron AODD Pump
This 2-inch WILDEN Turbo-Flo air-operated double-diaphragm pump uses ductile iron wetted housing and PTFE with Neoprene back-up diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
T8/WSAPB/TNU/TF/WF
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
534 L/min (141 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-14767 |
|---|---|
| Pump series | Turbo-Flo |
| Pump model code | T8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped metal |
| Wetted housing | Ductile iron |
| Diaphragm material | PTFE with Neoprene back-up |
| Check ball material | PTFE |
| Valve seat material | Wil-Flex™ (Santoprene®) |
02Operating data
| Maximum flow | 534 L/min (141 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 6.4 mm (1/4") |
| Displacement per stroke | 1.51 L (0.40 gal) |
| Listed suction lift | Dry 3.7 m (12 ft), wet 9.5 m (31 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Aluminum |
| Center section | Polypropylene |
| Air valve | Brass |
| Air inlet connection | 19 mm (3/4") |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 08-9980-07 | KIT, AIR, T/2"/O/C/B |
Enquiry information
Quote 08-14767 and T8/WSAPB/TNU/TF/WF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.