
| Item | 08-14857 |
|---|---|
| Model | XH800/SZSAA/FWL/WF/SWF |
| Series | High-pressure pump (XH800) |
| Wetted material | Stainless steel |
| Diaphragm material | Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD |
| Nominal model size | 2-inch |
| Construction | Bolted metal high-pressure |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / HIGH-PRESSURE PUMPS
08-14857 · 2-inch Stainless steel AODD Pump
This 2-inch WILDEN XH800 air-operated double-diaphragm pump uses stainless steel wetted housing and Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD diaphragms. Its bolted metal high-pressure construction is identified by the complete ordering code below.
Complete model
XH800/SZSAA/FWL/WF/SWF
NOMINAL MODEL SIZE
2-inch
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD
01Configuration
| Brand / item number | WILDEN / 08-14857 |
|---|---|
| Pump series | High-pressure pump (XH800) |
| Pump model code | XH800 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Bolted metal high-pressure |
| Wetted housing | Stainless steel |
| Diaphragm material | Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Stainless steel |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | No outer piston |
|---|---|
| Air chambers | Stainless steel |
| Center section | Aluminum |
| Air valve | Aluminum |
| Valve seat O-rings | Wil-Flex™ (Santoprene®) |
04Performance curves
Use the trace for this diaphragm configuration.
Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 08-9992-99 | KIT, AIR, H/2"/A/M/M |
Enquiry information
Quote 08-14857 and XH800/SZSAA/FWL/WF/SWF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.