
| Item | 08-15273 |
|---|---|
| Model | P800/KKPPP/ZWS/WF/KWF |
| Series | Pro-Flo |
| Wetted material | PVDF |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Nominal model size | 2-inch |
| Construction | Bolted plastic |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO SERIES
08-15273 · 2-inch PVDF AODD Pump
This 2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses PVDF wetted housing and Wil-Flex™ (Santoprene®) EZ-Install diaphragms. Its bolted plastic construction is identified by the complete ordering code below.
Complete model
P800/KKPPP/ZWS/WF/KWF
NOMINAL MODEL SIZE
2-inch
WETTED HOUSING
PVDF
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®) EZ-Install
01Configuration
| Brand / item number | WILDEN / 08-15273 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P800 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Bolted plastic |
| Wetted housing | PVDF |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | PVDF |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | PVDF |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | Wil-Flex™ (Santoprene®) |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 04-9986-20 | KIT, AIR, P/1.5"-2"/A/P/P |
| Wet kit | 08-9815-58-209 | KIT, WET, 2"/A/P/ZWS |
Enquiry information
Quote 08-15273 and P800/KKPPP/ZWS/WF/KWF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.