
| Item | 08-15423 |
|---|---|
| Model | PS800/PZPPP/FWL/WF/PTV |
| Series | Pro-Flo SHIFT |
| Wetted material | Polypropylene |
| Diaphragm material | Sanitary Wil-Flex™ (Santoprene®) integral piston diaphragm (IPD) |
| Nominal model size | 2-inch |
| Construction | Bolted plastic |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO SHIFT SERIES
08-15423 · 2-inch Polypropylene AODD Pump
This 2-inch WILDEN Pro-Flo SHIFT air-operated double-diaphragm pump uses polypropylene wetted housing and Sanitary Wil-Flex™ (Santoprene®) integral piston diaphragm (IPD) diaphragms. Its bolted plastic construction is identified by the complete ordering code below.
Complete model
PS800/PZPPP/FWL/WF/PTV
NOMINAL MODEL SIZE
2-inch
WETTED HOUSING
Polypropylene
DIAPHRAGM MATERIAL
Sanitary Wil-Flex™ (Santoprene®) integral piston diaphragm (IPD)
01Configuration
| Brand / item number | WILDEN / 08-15423 |
|---|---|
| Pump series | Pro-Flo SHIFT |
| Pump model code | PS800 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Bolted plastic |
| Wetted housing | Polypropylene |
| Diaphragm material | Sanitary Wil-Flex™ (Santoprene®) integral piston diaphragm (IPD) |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Polypropylene |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | No outer piston |
|---|---|
| Air chambers | Polypropylene |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE-encapsulated FKM |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 04-9994-20 | KIT, AIR, PS/1.5"-2"/A/P/P |
Enquiry information
Quote 08-15423 and PS800/PZPPP/FWL/WF/PTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.