
| Item | 08-15446 |
|---|---|
| Model | P8/WWAPP/ZWS/WF/WF/0014 |
| Series | Pro-Flo |
| Wetted material | Ductile iron |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Connection standard | BSP |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO SERIES
08-15446 · 2-inch Ductile iron AODD Pump
This 2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses ductile iron wetted housing and Wil-Flex™ (Santoprene®) EZ-Install diaphragms. Its clamped metal construction is identified by the complete ordering code below. Fluid connections use the BSP standard.
Complete model
P8/WWAPP/ZWS/WF/WF/0014
NOMINAL MODEL SIZE
2-inch BSP
WETTED HOUSING
Ductile iron
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®) EZ-Install
01Configuration
| Brand / item number | WILDEN / 08-15446 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped metal |
| Wetted housing | Ductile iron |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Wil-Flex™ (Santoprene®) |
| Connection standard | BSP |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Ductile iron |
|---|---|
| Air chambers | Aluminum |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Special option code | 0014 · BSP threaded |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 04-9985-20 | KIT, AIR, P/1.5"-2"/C/C/P |
| Wet kit | 08-9804-58-209 | KIT, WET, 2"/C/M/ZWS |
Enquiry information
Quote 08-15446 and P8/WWAPP/ZWS/WF/WF/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.