
| Item | 08-15804 |
|---|---|
| Model | P8/SZSPP/FWL/TF/STF/0070 |
| Series | Pro-Flo |
| Wetted material | Stainless steel |
| Diaphragm material | Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO SERIES
08-15804 · 2-inch Stainless steel AODD Pump
This 2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses stainless steel wetted housing and Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
P8/SZSPP/FWL/TF/STF/0070
NOMINAL MODEL SIZE
2-inch
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD
01Configuration
| Brand / item number | WILDEN / 08-15804 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped metal |
| Wetted housing | Stainless steel |
| Diaphragm material | Full-stroke sanitary Wil-Flex™ (Santoprene®) IPD |
| Check ball material | PTFE |
| Valve seat material | Stainless steel |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | No outer piston |
|---|---|
| Air chambers | Stainless steel |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE |
| Special option code | 0070 · Saniflo™ FDA |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 08-15804 and P8/SZSPP/FWL/TF/STF/0070 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 08-15804 and P8/SZSPP/FWL/TF/STF/0070, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.