
| Item | 08-15930 |
|---|---|
| Model | XPS8/WSSSS/NES/NE/NE |
| Series | Pro-Flo SHIFT |
| Wetted material | Ductile iron |
| Diaphragm material | Neoprene |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 2" |
WILDEN / PRO-FLO SHIFT SERIES
08-15930 · 2-inch Ductile iron AODD Pump
This 2-inch WILDEN Pro-Flo SHIFT air-operated double-diaphragm pump uses ductile iron wetted housing and Neoprene diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
XPS8/WSSSS/NES/NE/NE
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
700 L/min (185 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 08-15930 |
|---|---|
| Pump series | Pro-Flo SHIFT |
| Pump model code | XPS8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 2" |
| Actual fluid discharge size | 2" |
| Construction | Clamped metal |
| Wetted housing | Ductile iron |
| Diaphragm material | Neoprene |
| Check ball material | Neoprene |
| Valve seat material | Neoprene |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
| Maximum flow | 700 L/min (185 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 6.4 mm (1/4") |
| Displacement per stroke | 2.6 L (0.69 gal) |
| Listed suction lift | Dry 7.2 m (23.8 ft), wet 9.0 m (29.5 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Stainless steel |
| Center section | Stainless steel |
| Air valve | Stainless steel |
| Air inlet connection | 3/4" |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 08-15930 and XPS8/WSSSS/NES/NE/NE, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.