
| Item | 08-15979 |
|---|---|
| Model | P8/SSAPP/ZWS/WF/WF/0014 |
| Series | Pro-Flo |
| Wetted material | Stainless steel |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Nominal model size | 2-inch |
| Construction | Clamped metal |
| Connection standard | BSP |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO SERIES
08-15979 · 2-inch Stainless steel AODD Pump
This 2-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses stainless steel wetted housing and Wil-Flex™ (Santoprene®) EZ-Install diaphragms. Its clamped metal construction is identified by the complete ordering code below. Fluid connections use the BSP standard.
Complete model
P8/SSAPP/ZWS/WF/WF/0014
NOMINAL MODEL SIZE
2-inch BSP
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®) EZ-Install
01Configuration
| Brand / item number | WILDEN / 08-15979 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P8 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Clamped metal |
| Wetted housing | Stainless steel |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Wil-Flex™ (Santoprene®) |
| Connection standard | BSP |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Aluminum |
| Center section | Polypropylene |
| Air valve | Polypropylene |
| Special option code | 0014 · BSP threaded |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting 08-15979 and P8/SSAPP/ZWS/WF/WF/0014 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote 08-15979 and P8/SSAPP/ZWS/WF/WF/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.