WILDENAODD pumps, kits & parts
WILDEN 15-10010 T15/AAAAB/EPS/EP/EP
Item 15-10010
Model T15/AAAAB/EPS/EP/EP
Series Turbo-Flo
Wetted material Aluminum
Diaphragm material EPDM
Nominal model size 3-inch
Construction Clamped metal
Actual fluid inlet / discharge size 76 mm (3")

WILDEN / TURBO-FLO SERIES

15-10010 · 3-inch Aluminum AODD Pump

This 3-inch WILDEN Turbo-Flo air-operated double-diaphragm pump uses aluminum wetted housing and EPDM diaphragms. Its clamped metal construction is identified by the complete ordering code below.

Complete model
T15/AAAAB/EPS/EP/EP

NOMINAL MODEL SIZE

3-inch

MAXIMUM FLOW

878 L/min (232 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / 15-10010
Pump series Turbo-Flo
Pump model code T15
Nominal model size 3-inch
Actual fluid inlet size 76 mm (3")
Actual fluid discharge size 76 mm (3")
Construction Clamped metal
Wetted housing Aluminum
Diaphragm material EPDM
Check ball material EPDM
Valve seat material EPDM

02Operating data

Maximum flow 878 L/min (232 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 10 mm (3/8")
Displacement per stroke 5.3 L (1.40 gal)
Listed suction lift Dry 5.5 m (18 ft), wet 9.45 m (31 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Aluminum
Air chambers Aluminum
Center section Aluminum
Air valve Brass
Air inlet connection 19 mm (3/4")
T15 dimensional drawing
T15 Metal — dimensional drawing. Click to view the full-size image.

04Performance curves

T15 performance curve
T15 Metal performance curve — rubber diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Recommended repair kits

Kit type Item number Description
Air kit 15-9980-07 KIT, AIR, T/3"-4"/O/M/B
Wet kit 15-9804-54 KIT, WET, 3"/C/M/EPS

Enquiry information

Quote 15-10010 and T15/AAAAB/EPS/EP/EP, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for 15-10010