WILDENAODD pumps, kits & parts
WILDEN 15-10101 T15/SSAAB/TNU/TF/STF
Item 15-10101
Model T15/SSAAB/TNU/TF/STF
Series Turbo-Flo
Wetted material Stainless steel
Diaphragm material PTFE with Neoprene back-up
Nominal model size 3-inch
Construction Clamped metal
Actual fluid inlet / discharge size 76 mm (3")

WILDEN / TURBO-FLO SERIES

15-10101 · 3-inch Stainless steel AODD Pump

This 3-inch WILDEN Turbo-Flo air-operated double-diaphragm pump uses stainless steel wetted housing and PTFE with Neoprene back-up diaphragms. Its clamped metal construction is identified by the complete ordering code below.

Complete model
T15/SSAAB/TNU/TF/STF

NOMINAL MODEL SIZE

3-inch

MAXIMUM FLOW

704 L/min (186 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / 15-10101
Pump series Turbo-Flo
Pump model code T15
Nominal model size 3-inch
Actual fluid inlet size 76 mm (3")
Actual fluid discharge size 76 mm (3")
Construction Clamped metal
Wetted housing Stainless steel
Diaphragm material PTFE with Neoprene back-up
Check ball material PTFE
Valve seat material Stainless steel

02Operating data

Maximum flow 704 L/min (186 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 10 mm (3/8")
Displacement per stroke 3.6 L (0.95 gal)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Stainless steel
Air chambers Aluminum
Center section Aluminum
Air valve Brass
Valve seat O-rings PTFE
Air inlet connection 19 mm (3/4")
T15 dimensional drawing
T15 M E T A L — dimensional drawing. Click to view the full-size image.

04Performance curves

T15 performance curve
T15 performance curve — PTFE diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote 15-10101 and T15/SSAAB/TNU/TF/STF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for 15-10101