WILDENAODD pumps, kits & parts
WILDEN 15-11079 P15/WWAAP/NEU/NE/NE/0044
Item 15-11079
Model P15/WWAAP/NEU/NE/NE/0044
Series Pro-Flo
Wetted material Cast iron
Diaphragm material Neoprene Ultra-Flex™
Nominal model size 3-inch
Construction Clamped metal
Actual fluid inlet / discharge size 76 mm (3")

WILDEN / PRO-FLO SERIES

15-11079 · 3-inch Cast iron AODD Pump

This 3-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses cast iron wetted housing and Neoprene Ultra-Flex™ diaphragms. Its clamped metal construction is identified by the complete ordering code below.

Complete model
P15/WWAAP/NEU/NE/NE/0044

NOMINAL MODEL SIZE

3-inch

MAXIMUM FLOW

825 L/min (218 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / 15-11079
Pump series Pro-Flo
Pump model code P15
Nominal model size 3-inch
Actual fluid inlet size 76 mm (3")
Actual fluid discharge size 76 mm (3")
Construction Clamped metal
Wetted housing Cast iron
Diaphragm material Neoprene Ultra-Flex™
Check ball material Neoprene
Valve seat material Neoprene

02Operating data

Maximum flow 825 L/min (218 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 9.5 mm (3/8")
Displacement per stroke 4.62 L (1.22 gal)
Listed suction lift Dry 8.0 m (26.1 ft), wet 9.2 m (30.1 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Cast iron
Air chambers Aluminum
Center section Aluminum
Air valve Polypropylene
Air inlet connection 19 mm (3/4")
Special option code 0044 · Stallion balls and seats only
P15 dimensional drawing
P15 M E T A L — dimensional drawing. Click to view the full-size image.

04Performance curves

P15 performance curve
P15 Metal performance curve — Ultra-Flex™ diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote 15-11079 and P15/WWAAP/NEU/NE/NE/0044, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for 15-11079