
| Item | 15-11397 |
|---|---|
| Model | P15/WWAAP/WFS/TF/STF |
| Series | Pro-Flo |
| Wetted material | Cast iron |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Nominal model size | 3-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 76 mm (3") |
WILDEN / PRO-FLO SERIES
15-11397 · 3-inch Cast iron AODD Pump
This 3-inch WILDEN Pro-Flo air-operated double-diaphragm pump uses cast iron wetted housing and Wil-Flex™ (Santoprene®) diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
P15/WWAAP/WFS/TF/STF
NOMINAL MODEL SIZE
3-inch
MAXIMUM FLOW
878 L/min (232 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 15-11397 |
|---|---|
| Pump series | Pro-Flo |
| Pump model code | P15 |
| Nominal model size | 3-inch |
| Actual fluid inlet size | 76 mm (3") |
| Actual fluid discharge size | 76 mm (3") |
| Construction | Clamped metal |
| Wetted housing | Cast iron |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Check ball material | PTFE |
| Valve seat material | Stainless steel |
02Operating data
| Maximum flow | 878 L/min (232 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 9.5 mm (3/8") |
| Displacement per stroke | 5.7 L (1.49 gal) |
| Listed suction lift | Dry 6.9 m (22.7 ft), wet 9.2 m (29.5 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Cast iron |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Polypropylene |
| Valve seat O-rings | PTFE |
| Air inlet connection | 19 mm (3/4") |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 15-11397 and P15/WWAAP/WFS/TF/STF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.