
| Item | 15-11631 |
|---|---|
| Model | XPX15/AAAAA/EPS/EP/EP/0014 |
| Series | Pro-Flo X |
| Wetted material | Aluminum |
| Diaphragm material | EPDM |
| Nominal model size | 3-inch |
| Construction | Clamped metal |
| Connection standard | BSPT |
| Actual fluid inlet / discharge size | 76 mm (3") |
WILDEN / PRO-FLO X SERIES
15-11631 · 3-inch Aluminum AODD Pump
This 3-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses aluminum wetted housing and EPDM diaphragms. Its clamped metal construction is identified by the complete ordering code below. Fluid connections use the BSPT standard.
Complete model
XPX15/AAAAA/EPS/EP/EP/0014
NOMINAL MODEL SIZE
3-inch BSPT
MAXIMUM FLOW
918 L/min (243 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 15-11631 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | XPX15 |
| Nominal model size | 3-inch |
| Actual fluid inlet size | 76 mm (3") |
| Actual fluid discharge size | 76 mm (3") |
| Construction | Clamped metal |
| Wetted housing | Aluminum |
| Diaphragm material | EPDM |
| Check ball material | EPDM |
| Valve seat material | EPDM |
| Connection standard | BSPT |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
| Maximum flow | 918 L/min (243 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Displacement per stroke | 5.03 L (1.33 gal) |
| Listed shipping weight | 60 kg (132 lb) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Aluminum |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Special option code | 0014 · BSPT threaded |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 15-11631 and XPX15/AAAAA/EPS/EP/EP/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.