
| Item | 15-12048 |
|---|---|
| Model | XPX1520/SSSSS/EPS/EP/EP/0014 |
| Series | Pro-Flo X |
| Wetted material | Stainless steel |
| Diaphragm material | EPDM |
| Nominal model size | 3-inch |
| Construction | Bolted metal |
| Connection standard | BSPT |
| Actual fluid inlet / discharge size | 76 mm (3") |
WILDEN / PRO-FLO X SERIES
15-12048 · 3-inch Stainless steel AODD Pump
This 3-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses stainless steel wetted housing and EPDM diaphragms. Its bolted metal construction is identified by the complete ordering code below. Fluid connections use the BSPT standard.
Complete model
XPX1520/SSSSS/EPS/EP/EP/0014
NOMINAL MODEL SIZE
3-inch BSPT
MAXIMUM FLOW
1,030 L/min (272 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 15-12048 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | XPX1520 |
| Nominal model size | 3-inch |
| Actual fluid inlet size | 76 mm (3") |
| Actual fluid discharge size | 76 mm (3") |
| Construction | Bolted metal |
| Wetted housing | Stainless steel |
| Diaphragm material | EPDM |
| Check ball material | EPDM |
| Valve seat material | EPDM |
| Connection type | Threaded |
| Connection standard | BSPT |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
| Maximum flow | 1,030 L/min (272 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Stainless steel |
| Center section | Stainless steel |
| Air valve | Stainless steel |
| Fluid connection type | Threaded |
| Special option code | 0014 · BSPT threaded |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 15-12048 and XPX1520/SSSSS/EPS/EP/EP/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.