
| Item | 15-12170 |
|---|---|
| Model | T15/ASAAB/TSU/TF/ATF |
| Series | Turbo-Flo |
| Wetted material | Aluminum |
| Diaphragm material | PTFE with Saniflex™ back-up |
| Nominal model size | 3-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 76 mm (3") |
WILDEN / TURBO-FLO SERIES
15-12170 · 3-inch Aluminum AODD Pump
This 3-inch WILDEN Turbo-Flo air-operated double-diaphragm pump uses aluminum wetted housing and PTFE with Saniflex™ back-up diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
T15/ASAAB/TSU/TF/ATF
NOMINAL MODEL SIZE
3-inch
MAXIMUM FLOW
704 L/min (186 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 15-12170 |
|---|---|
| Pump series | Turbo-Flo |
| Pump model code | T15 |
| Nominal model size | 3-inch |
| Actual fluid inlet size | 76 mm (3") |
| Actual fluid discharge size | 76 mm (3") |
| Construction | Clamped metal |
| Wetted housing | Aluminum |
| Diaphragm material | PTFE with Saniflex™ back-up |
| Check ball material | PTFE |
| Valve seat material | Aluminum |
02Operating data
| Maximum flow | 704 L/min (186 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Maximum solids diameter | 10 mm (3/8") |
| Displacement per stroke | 3.6 L (0.95 gal) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Brass |
| Valve seat O-rings | PTFE |
| Air inlet connection | 19 mm (3/4") |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 15-9980-07 | KIT, AIR, T/3"-4"/O/M/B |
| Wet kit | 15-9804-55-203 | KIT, WET, 3"/O/M/TSU |
Enquiry information
Quote 15-12170 and T15/ASAAB/TSU/TF/ATF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.