
| Item | 20-10110 |
|---|---|
| Model | XPS20/WWAAA/ZWS/TF/VVT |
| Series | Pro-Flo SHIFT |
| Wetted material | Ductile iron |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Nominal model size | 4-inch |
| Construction | Clamped metal |
| Actual fluid inlet / discharge size | 102 mm (4") |
WILDEN / PRO-FLO SHIFT SERIES
20-10110 · 4-inch Ductile iron AODD Pump
This 4-inch WILDEN Pro-Flo SHIFT air-operated double-diaphragm pump uses ductile iron wetted housing and Wil-Flex™ (Santoprene®) EZ-Install diaphragms. Its clamped metal construction is identified by the complete ordering code below.
Complete model
XPS20/WWAAA/ZWS/TF/VVT
NOMINAL MODEL SIZE
4-inch
MAXIMUM FLOW
1,003 L/min (265 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / 20-10110 |
|---|---|
| Pump series | Pro-Flo SHIFT |
| Pump model code | XPS20 |
| Nominal model size | 4-inch |
| Actual fluid inlet size | 102 mm (4") |
| Actual fluid discharge size | 102 mm (4") |
| Construction | Clamped metal |
| Wetted housing | Ductile iron |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Check ball material | PTFE |
| Valve seat material | FKM |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
| Maximum flow | 1,003 L/min (265 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Displacement per stroke | 4.4 L (1.16 gal) |
| Listed suction lift | Dry 4.4 m (14.4 ft), wet 8.6 m (28.4 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Ductile iron |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Valve seat O-rings | FKM |
| Air inlet connection | 19 mm (3/4") |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote 20-10110 and XPS20/WWAAA/ZWS/TF/VVT, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.