
| Item | R02-13298 |
|---|---|
| Model | XPS230/SSAAA/TEU/TF/STF/0504 |
| Series | Pro-Flo SHIFT |
| Wetted material | Stainless steel |
| Diaphragm material | PTFE with EPDM back-up |
| Nominal model size | 1-inch |
| Construction | Bolted metal |
| Actual fluid inlet / discharge size | 25 mm (1") |
WILDEN / PRO-FLO SHIFT SERIES
R02-13298 · 1-inch Stainless steel AODD Pump
This 1-inch WILDEN Pro-Flo SHIFT air-operated double-diaphragm pump uses stainless steel wetted housing and PTFE with EPDM back-up diaphragms. Its bolted metal construction is identified by the complete ordering code below.
Complete model
XPS230/SSAAA/TEU/TF/STF/0504
NOMINAL MODEL SIZE
1-inch
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
PTFE with EPDM back-up
01Configuration
| Brand / item number | WILDEN / R02-13298 |
|---|---|
| Pump series | Pro-Flo SHIFT |
| Pump model code | XPS230 |
| Nominal model size | 1-inch |
| Actual fluid inlet size | 25 mm (1") |
| Actual fluid discharge size | 25 mm (1") |
| Construction | Bolted metal |
| Wetted housing | Stainless steel |
| Diaphragm material | PTFE with EPDM back-up |
| Check ball material | PTFE |
| Valve seat material | Stainless steel |
| Connection type | Flanged |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Valve seat O-rings | PTFE |
| Fluid connection type | Flanged |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting R02-13298 and XPS230/SSAAA/TEU/TF/STF/0504 and we will confirm the matching air kit and wet kit.
Enquiry information
Quote R02-13298 and XPS230/SSAAA/TEU/TF/STF/0504, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.