
| Item | S01-0010 |
|---|---|
| Model | TZ1/AAAAB/WFS/WF/AWF/0014 |
| Series | Turbo-Flo Z |
| Wetted material | Aluminum |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Nominal model size | 1/2-inch |
| Construction | Clamped metal |
| Connection standard | BSPT |
| Actual fluid inlet / discharge size | 13 mm (1/2") |
WILDEN / TURBO-FLO Z SERIES
S01-0010 · 1/2-inch Aluminum AODD Pump
This 1/2-inch WILDEN Turbo-Flo Z air-operated double-diaphragm pump uses aluminum wetted housing and Wil-Flex™ (Santoprene®) diaphragms. Its clamped metal construction is identified by the complete ordering code below. Fluid connections use the BSPT standard.
Complete model
TZ1/AAAAB/WFS/WF/AWF/0014
NOMINAL MODEL SIZE
1/2-inch BSPT
MAXIMUM FLOW
59 L/min (15.6 US gpm)
MAXIMUM PRESSURE
8.6 bar (125 psig)
Maximum air supply pressure
01Configuration
| Brand / item number | WILDEN / S01-0010 |
|---|---|
| Pump series | Turbo-Flo Z |
| Pump model code | TZ1 |
| Nominal model size | 1/2-inch |
| Actual fluid inlet size | 13 mm (1/2") |
| Actual fluid discharge size | 13 mm (1/2") |
| Construction | Clamped metal |
| Wetted housing | Aluminum |
| Diaphragm material | Wil-Flex™ (Santoprene®) |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Aluminum |
| Connection standard | BSPT |
02Operating data
| Maximum flow | 59 L/min (15.6 US gpm) |
|---|---|
| Maximum air supply pressure | 8.6 bar (125 psig) |
| Listed suction lift | Dry 4.2 m (13.8 ft), wet 7.9 m (26.0 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Aluminum |
|---|---|
| Center section | Aluminum |
| Air valve | Brass |
| Valve seat O-rings | Wil-Flex™ (Santoprene®) |
| Air inlet connection | 6 mm (1/4") |
| Special option code | 0014 · BSPT inlet and discharge |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote S01-0010 and TZ1/AAAAB/WFS/WF/AWF/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.