WILDENAODD pumps, kits & parts
WILDEN S01-0055 TZ1/PPAAB/TNU/TF/KTF
Item S01-0055
Model TZ1/PPAAB/TNU/TF/KTF
Series Turbo-Flo Z
Wetted material Polypropylene
Diaphragm material PTFE with Neoprene back-up
Nominal model size 1/2-inch
Construction Clamped plastic
Actual fluid inlet / discharge size 13 mm (1/2")

WILDEN / TURBO-FLO Z SERIES

S01-0055 · 1/2-inch Polypropylene AODD Pump

This 1/2-inch WILDEN Turbo-Flo Z air-operated double-diaphragm pump uses polypropylene wetted housing and PTFE with Neoprene back-up diaphragms. Its clamped plastic construction is identified by the complete ordering code below.

Complete model
TZ1/PPAAB/TNU/TF/KTF

NOMINAL MODEL SIZE

1/2-inch

MAXIMUM FLOW

54.5 L/min (14.4 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / S01-0055
Pump series Turbo-Flo Z
Pump model code TZ1
Nominal model size 1/2-inch
Actual fluid inlet size 13 mm (1/2")
Actual fluid discharge size 13 mm (1/2")
Construction Clamped plastic
Wetted housing Polypropylene
Diaphragm material PTFE with Neoprene back-up
Check ball material PTFE
Valve seat material PVDF

02Operating data

Maximum flow 54.5 L/min (14.4 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 1.6 mm (1/16")
Listed suction lift Dry 2.6 m (8.5 ft), wet 7.9 m (26.0 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Polypropylene
Center section Aluminum
Air valve Brass
Valve seat O-rings PTFE
Air inlet connection 6 mm (1/4")
TZ1 dimensional drawing
TZ1 Plastic — dimensional drawing. Click to view the full-size image.

04Performance curves

TZ1 performance curve
TZ1 Plastic performance curve — PTFE diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote S01-0055 and TZ1/PPAAB/TNU/TF/KTF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for S01-0055