WILDENAODD pumps, kits & parts
WILDEN S02-0034 TZ2/PKAAB/TNU/TF/PTV/0400
Item S02-0034
Model TZ2/PKAAB/TNU/TF/PTV/0400
Series Turbo-Flo Z
Wetted material Polypropylene
Diaphragm material PTFE with Neoprene back-up
Nominal model size 1-inch
Construction Clamped plastic
Actual fluid inlet / discharge size 25 mm (1")

WILDEN / TURBO-FLO Z SERIES

S02-0034 · 1-inch Polypropylene AODD Pump

This 1-inch WILDEN Turbo-Flo Z air-operated double-diaphragm pump uses polypropylene wetted housing and PTFE with Neoprene back-up diaphragms. Its clamped plastic construction is identified by the complete ordering code below.

Complete model
TZ2/PKAAB/TNU/TF/PTV/0400

NOMINAL MODEL SIZE

1-inch

WETTED HOUSING

Polypropylene

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / S02-0034
Pump series Turbo-Flo Z
Pump model code TZ2
Nominal model size 1-inch
Actual fluid inlet size 25 mm (1")
Actual fluid discharge size 25 mm (1")
Construction Clamped plastic
Wetted housing Polypropylene
Diaphragm material PTFE with Neoprene back-up
Check ball material PTFE
Valve seat material Polypropylene

02Operating data

Maximum air supply pressure 8.6 bar (125 psig)
Listed suction lift Dry 2.6 m (8.5 ft), wet 9.0 m (29.5 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons PVDF
Center section Aluminum
Air valve Brass
Valve seat O-rings PTFE-encapsulated FKM
Air inlet connection 6 mm (1/4")
Special option code 0400 · TZ2 plastic
TZ2 dimensional drawing
TZ2 Plastic — dimensional drawing. Click to view the full-size image.

04Performance curves

TZ2 performance curve
TZ2 Plastic performance curve — PTFE diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote S02-0034 and TZ2/PKAAB/TNU/TF/PTV/0400, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for S02-0034