WILDENAODD pumps, kits & parts
WILDEN S02-0037 TZ2/SSAAB/TNU/TF/STF/0014
Item S02-0037
Model TZ2/SSAAB/TNU/TF/STF/0014
Series Turbo-Flo Z
Wetted material Stainless steel
Diaphragm material PTFE with Neoprene back-up
Nominal model size 1-inch
Construction Clamped metal
Connection standard BSPT
Actual fluid inlet / discharge size 25 mm (1")

WILDEN / TURBO-FLO Z SERIES

S02-0037 · 1-inch Stainless steel AODD Pump

This 1-inch WILDEN Turbo-Flo Z air-operated double-diaphragm pump uses stainless steel wetted housing and PTFE with Neoprene back-up diaphragms. Its clamped metal construction is identified by the complete ordering code below. Fluid connections use the BSPT standard.

Complete model
TZ2/SSAAB/TNU/TF/STF/0014

NOMINAL MODEL SIZE

1-inch BSPT

WETTED HOUSING

Stainless steel

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / S02-0037
Pump series Turbo-Flo Z
Pump model code TZ2
Nominal model size 1-inch
Actual fluid inlet size 25 mm (1")
Actual fluid discharge size 25 mm (1")
Construction Clamped metal
Wetted housing Stainless steel
Diaphragm material PTFE with Neoprene back-up
Check ball material PTFE
Valve seat material Stainless steel
Connection standard BSPT

02Operating data

Maximum air supply pressure 8.6 bar (125 psig)
Displacement per stroke 0.2 L (0.04 gal)
Listed suction lift Dry 1.7 m (5.7 ft), wet 9.0 m (29.5 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Stainless steel
Center section Aluminum
Air valve Brass
Valve seat O-rings PTFE
Air inlet connection 6 mm (1/4")
Special option code 0014 · BSPT inlet and discharge
TZ2 dimensional drawing
TZ2 Metal — dimensional drawing. Click to view the full-size image.

04Performance curves

TZ2 performance curve
TZ2 Metal performance curve — reduced-stroke PTFE diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote S02-0037 and TZ2/SSAAB/TNU/TF/STF/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for S02-0037