WILDENAODD pumps, kits & parts
WILDEN S04-0098 TZ4/PPMAB/EPS/EP/PTV
Item S04-0098
Model TZ4/PPMAB/EPS/EP/PTV
Series Turbo-Flo Z
Wetted material Polypropylene
Diaphragm material EPDM
Nominal model size 1-1/2-inch
Construction Clamped plastic
Actual fluid inlet / discharge size 38 mm (1-1/2")

WILDEN / TURBO-FLO Z SERIES

S04-0098 · 1-1/2-inch Polypropylene AODD Pump

This 1-1/2-inch WILDEN Turbo-Flo Z air-operated double-diaphragm pump uses polypropylene wetted housing and EPDM diaphragms. Its clamped plastic construction is identified by the complete ordering code below.

Complete model
TZ4/PPMAB/EPS/EP/PTV

NOMINAL MODEL SIZE

1-1/2-inch

MAXIMUM FLOW

320 L/min (85 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / S04-0098
Pump series Turbo-Flo Z
Pump model code TZ4
Nominal model size 1-1/2-inch
Actual fluid inlet size 38 mm (1-1/2")
Actual fluid discharge size 38 mm (1-1/2")
Construction Clamped plastic
Wetted housing Polypropylene
Diaphragm material EPDM
Check ball material EPDM
Valve seat material Polypropylene

02Operating data

Maximum flow 320 L/min (85 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Maximum solids diameter 4.8 mm (3/16")
Listed suction lift Dry 5.0 m (16.3 ft), wet 8.6 m (28.4 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Polypropylene
Air chambers Mild steel
Center section Aluminum
Air valve Brass
Valve seat O-rings PTFE-encapsulated FKM
Air inlet connection 13 mm (1/2")
TZ4 dimensional drawing
TZ4 Plastic — dimensional drawing. Click to view the full-size image.

04Performance curves

TZ4 performance curve
TZ4 Plastic performance curve — rubber diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote S04-0098 and TZ4/PPMAB/EPS/EP/PTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for S04-0098