
| Item | S04-0129 |
|---|---|
| Model | XPR460/SSAAA/NES/NE/NE/0014 |
| Series | Pro-Flo R |
| Wetted material | Stainless steel |
| Diaphragm material | Neoprene |
| Nominal model size | 1.5-inch |
| Construction | Bolted metal |
| Connection standard | BSPT |
| Actual fluid inlet / discharge size | 38 mm (1.5") |
WILDEN / PRO-FLO R SERIES
S04-0129 · 1.5-inch Stainless steel AODD Pump
This 1.5-inch WILDEN Pro-Flo R air-operated double-diaphragm pump uses stainless steel wetted housing and Neoprene diaphragms. Its bolted metal construction is identified by the complete ordering code below. Fluid connections use the BSPT standard.
Complete model
XPR460/SSAAA/NES/NE/NE/0014
NOMINAL MODEL SIZE
1.5-inch BSPT
MAXIMUM FLOW
322 L/min (85 US gpm)
DIAPHRAGM MATERIAL
Neoprene
01Configuration
| Brand / item number | WILDEN / S04-0129 |
|---|---|
| Pump series | Pro-Flo R |
| Pump model code | XPR460 |
| Nominal model size | 1.5-inch |
| Actual fluid inlet size | 38 mm (1.5") |
| Actual fluid discharge size | 38 mm (1.5") |
| Construction | Bolted metal |
| Wetted housing | Stainless steel |
| Diaphragm material | Neoprene |
| Check ball material | Neoprene |
| Valve seat material | Neoprene |
| Connection type | Threaded |
| Connection standard | BSPT |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
| Maximum flow | 322 L/min (85 US gpm) |
|---|---|
| Listed suction lift | Dry 6.5 m (21.3 ft), wet 9 m (29.5 ft) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Air inlet connection | 3/4" |
| Fluid connection type | Threaded |
| Special option code | 0014 · BSPT threaded |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote S04-0129 and XPR460/SSAAA/NES/NE/NE/0014, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.