WILDENAODD pumps, kits & parts
WILDEN S08-0061 TZ8/SSAAB/TNU/TF/STF
Item S08-0061
Model TZ8/SSAAB/TNU/TF/STF
Series Turbo-Flo Z
Wetted material Stainless steel
Diaphragm material PTFE with Neoprene back-up
Nominal model size 2-inch
Construction Clamped metal
Actual fluid inlet / discharge size 51 mm (2")

WILDEN / TURBO-FLO Z SERIES

S08-0061 · 2-inch Stainless steel AODD Pump

This 2-inch WILDEN Turbo-Flo Z air-operated double-diaphragm pump uses stainless steel wetted housing and PTFE with Neoprene back-up diaphragms. Its clamped metal construction is identified by the complete ordering code below.

Complete model
TZ8/SSAAB/TNU/TF/STF

NOMINAL MODEL SIZE

2-inch

MAXIMUM FLOW

516 L/min (136 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / S08-0061
Pump series Turbo-Flo Z
Pump model code TZ8
Nominal model size 2-inch
Actual fluid inlet size 51 mm (2")
Actual fluid discharge size 51 mm (2")
Construction Clamped metal
Wetted housing Stainless steel
Diaphragm material PTFE with Neoprene back-up
Check ball material PTFE
Valve seat material Stainless steel

02Operating data

Maximum flow 516 L/min (136 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Displacement per stroke 1.5 L (0.41 gal)
Listed suction lift Dry 3.6 m (11.9 ft), wet 9.0 m (29.5 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons Stainless steel
Air chambers Aluminum
Center section Aluminum
Air valve Brass
Valve seat O-rings PTFE
Air inlet connection 19 mm (3/4")
TZ8 dimensional drawing
TZ8 Metal — dimensional drawing. Click to view the full-size image.

04Performance curves

TZ8 performance curve
TZ8 Metal performance curve — reduced-stroke PTFE diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote S08-0061 and TZ8/SSAAB/TNU/TF/STF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for S08-0061