WILDENAODD pumps, kits & parts
WILDEN S08-0090 TZ8/PKAAB/EPS/EP/PTV
Item S08-0090
Model TZ8/PKAAB/EPS/EP/PTV
Series Turbo-Flo Z
Wetted material Polypropylene
Diaphragm material EPDM
Nominal model size 2-inch
Construction Clamped plastic
Actual fluid inlet / discharge size 51 mm (2")

WILDEN / TURBO-FLO Z SERIES

S08-0090 · 2-inch Polypropylene AODD Pump

This 2-inch WILDEN Turbo-Flo Z air-operated double-diaphragm pump uses polypropylene wetted housing and EPDM diaphragms. Its clamped plastic construction is identified by the complete ordering code below.

Complete model
TZ8/PKAAB/EPS/EP/PTV

NOMINAL MODEL SIZE

2-inch

MAXIMUM FLOW

582 L/min (154 US gpm)

MAXIMUM PRESSURE

8.6 bar (125 psig)

Maximum air supply pressure

01Configuration

Brand / item number WILDEN / S08-0090
Pump series Turbo-Flo Z
Pump model code TZ8
Nominal model size 2-inch
Actual fluid inlet size 51 mm (2")
Actual fluid discharge size 51 mm (2")
Construction Clamped plastic
Wetted housing Polypropylene
Diaphragm material EPDM
Check ball material EPDM
Valve seat material Polypropylene

02Operating data

Maximum flow 582 L/min (154 US gpm)
Maximum air supply pressure 8.6 bar (125 psig)
Listed suction lift Dry 5.9 m (19.3 ft), wet 9.0 m (29.5 ft)

Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.

03Materials and connections

Outer pistons PVDF
Air chambers Aluminum
Center section Aluminum
Air valve Brass
Valve seat O-rings PTFE-encapsulated FKM
Air inlet connection 19 mm (3/4")
TZ8 dimensional drawing
TZ8 Plastic — dimensional drawing. Click to view the full-size image.

04Performance curves

TZ8 performance curve
TZ8 Plastic performance curve — rubber diaphragms. Click to view the full-size image.

Use the trace for this diaphragm configuration.

Enquiry information

Quote S08-0090 and TZ8/PKAAB/EPS/EP/PTV, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.

Send an enquiry for S08-0090