
| Item | S08-0109 |
|---|---|
| Model | XPX830/SSAAA/ZWS/WF/WF |
| Series | Pro-Flo X |
| Wetted material | Stainless steel |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Nominal model size | 2-inch |
| Construction | Bolted metal |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / PRO-FLO X SERIES
S08-0109 · 2-inch Stainless steel AODD Pump
This 2-inch WILDEN Pro-Flo X air-operated double-diaphragm pump uses stainless steel wetted housing and Wil-Flex™ (Santoprene®) EZ-Install diaphragms. Its bolted metal construction is identified by the complete ordering code below.
Complete model
XPX830/SSAAA/ZWS/WF/WF
NOMINAL MODEL SIZE
2-inch
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®) EZ-Install
01Configuration
| Brand / item number | WILDEN / S08-0109 |
|---|---|
| Pump series | Pro-Flo X |
| Pump model code | XPX830 |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Bolted metal |
| Wetted housing | Stainless steel |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Wil-Flex™ (Santoprene®) |
| Connection type | Flanged |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Fluid connection type | Flanged |
04Recommended repair kits
Repair kits for this pump are confirmed by item number and complete model code. Send an enquiry quoting S08-0109 and XPX830/SSAAA/ZWS/WF/WF and we will confirm the matching air kit and wet kit.
Enquiry information
Quote S08-0109 and XPX830/SSAAA/ZWS/WF/WF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.