
| Item | S08-0170 |
|---|---|
| Model | XPR860P/AAAAA/TNU/TF/ATF |
| Series | Powder transfer pump (XPR860P) |
| Wetted material | Aluminum |
| Diaphragm material | PTFE with Neoprene back-up |
| Nominal model size | 2-inch |
| Construction | Powder transfer |
| Actual fluid inlet / discharge size | 51 mm (2") |
WILDEN / POWDER TRANSFER PUMPS
S08-0170 · 2-inch Aluminum AODD Pump
This 2-inch WILDEN XPR860P air-operated double-diaphragm pump uses aluminum wetted housing and PTFE with Neoprene back-up diaphragms. Its powder transfer construction is identified by the complete ordering code below.
Complete model
XPR860P/AAAAA/TNU/TF/ATF
NOMINAL MODEL SIZE
2-inch
MAXIMUM FLOW
575 L/min (152 US gpm)
DIAPHRAGM MATERIAL
PTFE with Neoprene back-up
01Configuration
| Brand / item number | WILDEN / S08-0170 |
|---|---|
| Pump series | Powder transfer pump (XPR860P) |
| Pump model code | XPR860P |
| Nominal model size | 2-inch |
| Actual fluid inlet size | 51 mm (2") |
| Actual fluid discharge size | 51 mm (2") |
| Construction | Powder transfer |
| Wetted housing | Aluminum |
| Diaphragm material | PTFE with Neoprene back-up |
| Check ball material | PTFE |
| Valve seat material | Aluminum |
02Operating data
| Maximum flow | 575 L/min (152 US gpm) |
|---|---|
| Displacement per stroke | 1.7 L (0.45 gal) |
| Listed suction lift | Dry 4.4 m (14.5 ft), wet 9.0 m (29.5 ft) |
| Listed shipping weight | 37.5 kg (82 lb) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Aluminum |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Valve seat O-rings | PTFE |
| Air inlet connection | 3/4" |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote S08-0170 and XPR860P/AAAAA/TNU/TF/ATF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.