
| Item | S15-0125 |
|---|---|
| Model | XPR1560P/AAAAA/ZWS/WF/WF |
| Series | Powder transfer pump (XPR1560P) |
| Wetted material | Aluminum |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Nominal model size | 3-inch |
| Construction | Powder transfer |
| Actual fluid inlet / discharge size | 76 mm (3") |
WILDEN / POWDER TRANSFER PUMPS
S15-0125 · 3-inch Aluminum AODD Pump
This 3-inch WILDEN XPR1560P air-operated double-diaphragm pump uses aluminum wetted housing and Wil-Flex™ (Santoprene®) EZ-Install diaphragms. Its powder transfer construction is identified by the complete ordering code below.
Complete model
XPR1560P/AAAAA/ZWS/WF/WF
NOMINAL MODEL SIZE
3-inch
MAXIMUM FLOW
900 L/min (238 US gpm)
DIAPHRAGM MATERIAL
Wil-Flex™ (Santoprene®) EZ-Install
01Configuration
| Brand / item number | WILDEN / S15-0125 |
|---|---|
| Pump series | Powder transfer pump (XPR1560P) |
| Pump model code | XPR1560P |
| Nominal model size | 3-inch |
| Actual fluid inlet size | 76 mm (3") |
| Actual fluid discharge size | 76 mm (3") |
| Construction | Powder transfer |
| Wetted housing | Aluminum |
| Diaphragm material | Wil-Flex™ (Santoprene®) EZ-Install |
| Check ball material | Wil-Flex™ (Santoprene®) |
| Valve seat material | Wil-Flex™ (Santoprene®) |
02Operating data
| Maximum flow | 900 L/min (238 US gpm) |
|---|---|
| Displacement per stroke | 5.8 L (1.55 gal) |
| Listed suction lift | Dry 6.4 m (20.9 ft), wet 9.0 m (29.5 ft) |
| Listed shipping weight | 64.5 kg (141 lb) |
Maximum flow and maximum pressure are separate ratings. Check the duty point, fluid compatibility, temperature and suction conditions for the complete pump configuration.
03Materials and connections
| Outer pistons | Aluminum |
|---|---|
| Air chambers | Aluminum |
| Center section | Aluminum |
| Air valve | Aluminum |
| Air inlet connection | 3/4" |
04Performance curves
Use the trace for this diaphragm configuration.
Enquiry information
Quote S15-0125 and XPR1560P/AAAAA/ZWS/WF/WF, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.