
| Item | 15-13000 |
|---|---|
| Model | XPS15/SSSSS/FSS/FS/FS/0070 |
| Series | Pro-Flo SHIFT |
| Wetted material | Stainless steel |
| Diaphragm material | Saniflex™ (Hytrel®) |
| Nominal model size | 3-inch |
| Construction | Sanitary clamped metal |
| Actual fluid inlet / discharge size | 76 mm (3") |
WILDEN / PRO-FLO SHIFT SERIES
15-13000 · 3-inch Stainless steel AODD Pump
This 3-inch WILDEN Pro-Flo SHIFT air-operated double-diaphragm pump uses stainless steel wetted housing and Saniflex™ (Hytrel®) diaphragms. Its sanitary clamped metal construction is identified by the complete ordering code below.
Complete model
XPS15/SSSSS/FSS/FS/FS/0070
NOMINAL MODEL SIZE
3-inch
WETTED HOUSING
Stainless steel
DIAPHRAGM MATERIAL
Saniflex™ (Hytrel®)
01Configuration
| Brand / item number | WILDEN / 15-13000 |
|---|---|
| Pump series | Pro-Flo SHIFT |
| Pump model code | XPS15 |
| Nominal model size | 3-inch |
| Actual fluid inlet size | 76 mm (3") |
| Actual fluid discharge size | 76 mm (3") |
| Construction | Sanitary clamped metal |
| Wetted housing | Stainless steel |
| Diaphragm material | Saniflex™ (Hytrel®) |
| Check ball material | Saniflex™ (Hytrel®) |
| Valve seat material | Saniflex™ (Hytrel®) |
| Explosion protection | ATEX (X-prefix model) |
02Operating data
Operating data for this configuration is not listed in the WILDEN documentation for this model code. Please send an enquiry with the item number and the complete model code.
03Materials and connections
| Outer pistons | Stainless steel |
|---|---|
| Air chambers | Stainless steel |
| Center section | Stainless steel |
| Air valve | Stainless steel |
| Special option code | 0070 · Saniflo™ FDA |
04Recommended repair kits
| Kit type | Item number | Description |
|---|---|---|
| Air kit | 15-9993-99 | KIT, AIR, PS/3"/C/M/M |
| Wet kit | 15-9804-56 | KIT, WET, 3"/C/M/FSS |
Enquiry information
Quote 15-13000 and XPS15/SSSSS/FSS/FS/FS/0070, together with quantity, fluid, operating temperature, required flow and discharge pressure. For replacement parts, include the component number and a clear pump nameplate photo.