WHITEPAPER · 2026-09-15
AODD pump selection guide for plant and maintenance engineers
A practical checklist for sizing and specifying air-operated double-diaphragm pumps from an item-number catalogue.
This guide explains how to move from a process duty to a WILDEN air-operated double-diaphragm (AODD) pump item number using the fields published in this catalogue. It is written for plant, reliability and maintenance engineers who already know their fluid and piping constraints.
1. Capture the duty
Write down fluid name and concentration, operating temperature, required flow, discharge pressure, suction condition (flooded or suction lift), solids content and maximum particle size, and whether the pump may deadhead. Note the available air pressure and whether the utility is plant air or natural gas.
2. Fix connections and size
Match nominal port size and connection standard to the pipe class. The catalogue lists actual inlet and discharge sizes per configuration. Do not assume that a “1-1/2 inch” sales size always shares the same connection detail across series.
3. Choose series family
Start from the installed-base series when replacing an existing pump. For new duties, compare Pro-Flo SHIFT, Pro-Flo, Pro-Flo X, Turbo-Flo and specialty families (high-pressure, powder, sanitary, natural-gas) against efficiency, hygiene and utility constraints. Series pages on this site count the configurations available in each family.
4. Lock materials
Select wetted housing, diaphragm, ball/flap and seat materials for chemistry and temperature. Sanitary FDA and hygienic HS builds belong on food, beverage and pharmaceutical duties that need those options — use the dedicated sanitary listings rather than converting an industrial code informally.
5. Confirm operating data
Read maximum flow, maximum air supply pressure, solids diameter, displacement and suction figures only from the product page for that item number. Where a value is absent, the documentation did not list it for that code; ask before you assume.
6. Plan kits and spares
Note the recommended wet kit and air kit item numbers on the pump page. Stock kits against critical tags. For shared spares across a fleet, group pumps by air-section family and diaphragm material so one kit covers multiple tags where the codes allow.
7. Enquire with evidence
Send item number, complete model code, duty data and a nameplate photo. That is enough for a quotation on pumps, kits or parts without repeated clarification loops.
Related reading on this site: the pump series hub, Saniflo FDA / HS listings, the repair-kit planning whitepaper, and the application cases.