WHITEPAPER · 2026-10-08
Whitepaper: repair-kit and spare-parts planning for AODD fleets
A storeroom-oriented approach to wet kits, air kits and high-wear spare parts across a multi-series WILDEN fleet.
Maintenance teams that run mixed WILDEN air-operated double-diaphragm fleets need a spare-parts strategy that follows item numbers, not tribal knowledge. This whitepaper outlines a simple planning method using the kit and parts structure of this catalogue.
Separate wet and air
A wet kit typically covers diaphragms, balls or flaps, seats and related elastomers on the fluid side. An air kit covers the air valve and related air-section wear parts. Wet kits and air kits fail on different schedules. Track consumption separately for six months, then set min/max levels per family. Critical process pumps should have a dedicated wet kit on the shelf; air kits can often be pooled by air-section family.
Plants that run abrasive slurries or aggressive chemicals usually consume wet kits faster than air kits. Air-side failures show up as stalling, short stroking or erratic shift; fluid-side failures show up as leakage, loss of suction or contamination of the product.
Key from the pump page
Each pump product page that lists recommended kits is the reference list for that configuration. Copy those kit item numbers into your CMMS against the asset tag. When a special option (sanitary, Stallion-style, natural gas) is present, verify the kit list still applies before you standardise. Use those kit item numbers rather than building a basket from individual spare parts unless you are replacing a single failed component.
When you open a kit, match the kit item number to the pump’s complete model code. Diaphragm material and valve material must match the code on the nameplate. Mixing a PTFE diaphragm kit onto a pump ordered with a different elastomer is a common cause of early failure.
High-wear individuals
Some sites also stock individual diaphragms, balls and seats for between-kit top-ups. Use the spare-parts type pages to find item numbers, and keep compatibility notes from the part page in the storeroom system.
Fleet segmentation
Segment the fleet by series (Pro-Flo SHIFT, Pro-Flo, Pro-Flo X, Turbo-Flo, sanitary, high-pressure, and so on) and by diaphragm material. Two pumps that share series and elastomer letters are far more likely to share kit item numbers than two pumps that only share port size.
Keep at least one wet kit per critical pump tag, plus a shared air kit for each air-section family you run in volume. For seasonal or standby pumps, a single wet kit in the storeroom is often enough if lead time for that item number is short.
Incoming inspection
When kits arrive, check the kit item number against the purchase order and against the pump code in the CMMS. Wrong elastomer kits are difficult to spot once bags are opened on a night shift.
Enquiry discipline
For missing or superseded item numbers, send the pump item number, complete model code, nameplate photo and the failed part’s number if readable. If the pump has a special option code, include that too — some sanitary and Stallion-style options change which kit applies. That is the fastest path to a confirmed spare on this catalogue’s enquiry form.
See also: the nameplate identification guide and the AODD selection guide.